Shred-X Pty Ltd (Company) processes paper and waste products for recycling. On 5 March 2015, an employee of the Company was sorting paper that was travelling on a moving conveyor belt.
The conveyor had a slid guard at the point where the roller and conveyor met to prevent access to the nip point created by this meeting.
If the guard was removed, there was a risk of serious injury to workers. On the day of the incident, paper became stuck in the nip point of the conveyor belt. To remove the jam, the worker
slid off the guard the reached into the nip point to dislodge the paper. When she put her hand inside the guarded area, the glove she was wearing became entangled in the conveyor and pulled her
arm into the nip point. She sustained injuries to her arm.
The Court found the Company workers had been generally instructed not to remove guards from machines. However, the Court found the Company had failed to ensure the use of an interlock device that
would have removed the risk of injury. The Company was convicted and sentenced to pay a fine of $20,000.
Businesses must ensure plant is safe for use, so that workers are not exposed to nip or crush injuries if guards are removed. All levels of risk controls should be implemented where practicable,
including interlock devices to ensure that the plant is not powered or operational when guards are not in place.
Interested in reviewing you safety management system and putting its implementation to the test? Click here to contact us today.
If you require any assistance on this topic contact us here.